Autowatch Ghost How To Enter Emergency Code

If you own an Autowatch Ghost you may at some point in the vehicle ownership need to enter the Autowatch Ghost emergency code. This is ONLY used for example if one of the original vehicle buttons breaks or simply stops working. The Ghost uses the brake and the acceleration pedal to enter the code in most cases. On some Range Rovers you use the brake pedal and high beam flash or hazard button. ( Always check this with your installer )

On most vehicles just the brake and accelration pedal are used. So we will talk you through the most common way.

 ( Some other vehicles use high beam flash or Hazard switch )

EXAMPLE Code - 2211

• Igition On ( dash lights ).
• Press and hold brake, tap accelerator pedal 2 times.
• Release brake.
• Press and hold brake, tap accelerator pedal 2 times.
• Release brake.
• Press and hold brake, tap accelerator pedal 1 time.
• Release brake.
• Press and hold brake, tap accelerator pedal 1 time.
• Release brake.

Providing the code has been entered correctly / The indication light will flash and you can now start the vehicle.

( If you want to learn a NEW pin number while your in this mode follow the steps below.... )

The vehicles Ghost indication light will flash once every 3 seconds, this allows you to enter a new pin code.

A new code is entered by entering a new pin number you will get 3 flashes.

Enter the new pin number once more and you will get 2 flashes.

Ignition Off