Pandora Maintenance Mode

With many Pandora installations being carried out on vehicles less than 3 years old, many customers ask what should you do when putting your car in for a service or a vehicle main dealer recall or even an engine remap. With Pandora systems running the latest Bluetooth software you can put the Pandora alarm and immobiliser in maintenance mode. To carry this out simply follow the bullet points below.

Activate Maintenance Mode

• Sit inside your vehicle with the Pandora BT smartphone app connected.
• Turn the vehicles ignition on.
• The Pandora ADR tag has a small button at the top of the tag ( moon shape ), Press and hold the button for 3 seconds then release ( LED will flash on tag ).
• Maintenance mode is now active and your smartphone will have the same logo as above.
• Ignition Off

When leaving your vehicle with the dealer you won't need to hand them your ADR tag or remote ( if you have a remote system )

PLEASE BE AWARE YOUR VEHICLE IS NOT PROTECTED IN MAINTENACE MODE

Disable Maintenance Mode

• Sit inside your vehicle with the Pandora BT smartphone app connected.
• Turn the vehicles ignition on.
• The Pandora ADR tag has a small button at the top of the tag ( moon shape ), Press and hold the button for 3 seconds then release ( LED will flash on tag ).
• Maintenance mode is now disabled and your smartphone will have the unlock padlock appear.
• Ignition Off

Still unsure on any of the advice given above? give us a call on 07525 068291